In order to provide complete functionality, this web site needs your explicit consent to store browser cookies. If you don't allow cookies, you may not be able to use certain features of the web site including but not limited to: comparison, request for quote, see personalized content or switch between sites. It is recommended that you allow all cookies.
OIML Calibration Weight Sets
Calibration Weight Sets Adjusted to Meet or Exceed OIML Class E1, E2, F1, and F2 Tolerances

Weight Set OIML 50g-1mg CLF2 No Cert TR

OIML Class F2
Weight Set Range 50 g - 1 mg
Set Capacity 211.11 g
Item Number: 30390827
Overview
Troemner OIML Calibration Weight Sets offer the tightest tolerances, lowest uncertainties, and all surfaces are polished to a perfect finish to meet or exceed OIML R 111 tolerance and design restrictions. OIML Class E1, E2, F1, and F2 calibration weights are manufactured from high grade stainless steels including Troemner Alloy 8 which possesses closely controlled density, low magnetic susceptibility, and corrosion resistance.
Applications
Use OIML E1 as a primary reference to calibrate other mass standards and use for traceability between national mass standards and OIML E2 weights and lower. OIML E1 is appropriate for calibrating high-precision balances with a readability as low as 0.1 mg.
Display
N/A
Operation
N/A
Communication
N/A
Construction
Weights 1 g and above are two-piece. Weights 500 mg and below are one-piece. Weights 50 kg to 1 kg are Troemner Alloy 8 or 316 Stainless Steel. Weights 500 g to 1 g are Troemner Alloy 8. Weights ≤500 mg are 303 Stainless Steel, 304 Stainless Steel or Aluminum.
Design Features
Weights 1g - 50kg have a tapered neck allowing easy handling, polished mirror-like finish allowing scratches or foreign matter to be seen, and bottom of weights are recessed to reduce wear. mg weights are flat with one end turned up for easy handling.
Specifications
OIML Class F2
Weight Set Range 50 g - 1 mg
Set Capacity 211.11 g
Set Total Pieces 20
Protective Case Included
Construction 1 g and above are two-piece; 500 mg and below are one-piece
Density at 20°C Below 5 mg are 2.70 g/cm3;500 mg to 5 mg are 7.95 g/cm3;1 g and above are 8.03 g/cm3
Dimensions in Case 3.5 in x 7 in x 8 in (8.89 cm x 17.78 cm x 20.32 cm) (LxHxW)
Set Contents (2) 2 g;(2) 20 mg;500 mg;10 g;(2) 20 g;100 mg;10 mg;(2) 200 mg;1 g;50 g;5 g;5 mg;(2) 2 mg;50 mg;1 mg
Weight Material Weights 1 g and above are Troemner Alloy 8, weights 5 mg through 500 mg are 316 Stainless Steel, weights below 5 mg are 3003-H14 Aluminum;500 mg to 5 mg are 316 Stainless Steel;≥1 g are Troemner Alloy 8;Below 5 mg are Aluminum
Wgt Origin (USA) USA
Documents